Stainless Steel Adjustable Bangle Double Bar Manufacturers

Early bumpers were made of metal, but later replaced with plastic. In this early car, the front bumper and the rear bumper were really stamped out of this kind of steel plate of metal material, and they were connected to the frame. It felt like an armored car or a tank, and I felt that it was safer.

3D entry model NEW SPECTRUM has included contact scanning technology as standard equipment. This improvement also brings all 3D series to the scanning era. The contact scanning function can obtain more point data and contour information can obtain better reliability and repeatability than single-point measurement, so as to control the quality of shipments and reduce production costs.

The characteristics of CNC Machining Parts are mainly reflected in the following aspects:

Under normal circumstances, the color of the finished precision castings is silver-white or silver-gray, but after a period of use, some castings will appear black, and the whole or part of the castings are processed products and designs. If the concept does not match, it will be deformed. What are the reasons and solutions for blackening and deformation?

The factory area is approximately 50,000 square meters, total investment is about 60 million US dollars, with more than 1,000 sets of various advanced production machines and 20 sets of high-precision testing/inspection equipment.

Die forging is a method of forming on a forging die developed on the basis of free forging and die forging in order to solve the problems of low productivity and poor precision of free forging, and to achieve the needs of large-scale and specialized production of forgings. Die forging is the abbreviation of model forging. The forging die (forging die) is generally composed of an upper die and a lower die. The upper and lower dies of the forging die are respectively fixed on the hammer head and the die pad. or die groove), the shape and size of the cavity of the groove is the same as the shape and size of the forging. During die forging, the blank is placed on the lower die, and the upper die moves down with the hammer (or slider) to close the die (one or more times) to hit the blank. Under the action, plastic deformation is generated and the groove is filled, and finally a forging with the same shape as the groove is obtained.